Node name: NodeSubtend (Original Node280)
Live Date: February 8th, 2014 (Original 2003-11-21)
Sponsor: KrisAmundson
Contact: KrisAmundson
NE 14th Ave. & Alberta
Portland, OR
Configuration
Host: flappy
- Hardware: Buffalo WZR600DHP
Software: OpenWRT
- Internet IPv4: DHCP
PTPnet IPv4: 10.11.13.1/26
- PTPnet IPv6:
- radio0:
- Channel: 6
- Power: 501mW
- Interface: ptp
- SSID: www.personaltelco.net
BSSID: 10:6F:3F:E7:DF:34
- Mode: 802.11g+n
- Auth: Open
- radio1:
- Channel: 149 (40MHz 2nd channel above)
- Power: 501mW
- Interface: LAN
- SSID: subtend
BSSID: 10:6F:3F:E7:DF:35
- Mode: 802.11a+n
- Auth: WPA2-AES
Installers / Organizers
Maintenance and System Log
- 2014-02-08 - Node is up and open.
2014-02-02 - As of this date no node is up, but a new node is coming near NE 14th & Alberta.
- Logs below are for when node was in Tigard.
- 2005-??-?? - "Upgraded" to a Cisco 1231, someday will get something better running a captive portal
- 2004-07-11 - Moved to larger subnet (/28 to /24). Still no external antenna.
2003-11-21 - Initial Linksys setup. Allocated PTP subnet and created NodeDb and proper PTP wiki pages. Considering ditching the Linksys and going for a Senao. No external antenna at this point. Might occur in the next couple weeks (the purchasing at least).
Notes
- 2014-02-08 - Couple things for now
- No captive portal
- Using 2.4GHz-only for PTP. Since I'm in a commercial space but not actually on Alberta and due to the Buffalo not being able to use external antennas, I'm sticking with the frequency that has greater distance through walls.