Differences between revisions 19 and 20
Revision 19 as of 2005-08-07 10:29:21
Size: 3834
Comment:
Revision 20 as of 2005-09-15 19:08:08
Size: 3948
Editor: 198
Comment: hot to the touch
Deletions are marked like this. Additions are marked like this.
Line 17: Line 17:
  * 9-15-05 - Sold out / on back order
Line 18: Line 19:
  * 9-15-05 - Price has gone up to $75.04, still has same rebate. $50.04

Netgear WGT634U

http://netgear.com/images/products/large/wgt634u.jpg TableOfContents

Introduction

A Linux router with a 200MHz MIPS32-like core with Atheros wireless and USB host supported by [http://pdos.csail.mit.edu/roofnet/doku.php MIT's Roofnet] project.

Where to buy

Source

Netgear has the source available here: BR http://kbserver.netgear.com/kb_web_files/n101238.asp BR ftp://downloads.netgear.com/files/GPL/ BR

  • boa
  • bpalogin-2.0.2
  • bridge-utils-0.9.6.orig
  • broadcom-src
  • busybox-0.60.5
  • check-4.2
  • debianutils-2.6.1
  • dhcpcd
  • dnsmasq-1.18.orig
  • e2fsprogs-1.27
  • ez-ipupdate-3.0.11b8
  • ifupdown-0.6.4
  • iproute2
  • iptables-1.2.7a
  • linux-2.4.x
    • Kernel 2.4.20 is used.
  • linuxigd
  • mawk-1.3.3
  • mtd
  • net-tools-1.60
  • nfqueue
  • pptp
  • procmail-3.22
  • proftpd-1.2.5
  • quagga-0.96.5
  • rp-pppoe-3.3
  • samba-1.9.16
  • sed-2.05
  • smtpclient-1.0.0
  • snarf
  • sysklogd-1.4.1
  • sysvinit-2.84.orig
  • tinylogin-1.2
  • uClibc
  • upnpsdk
  • wireless_tools.25

For this source code release, two toolchains are required:

1. A MIPS little-endian toolchain. For example, hndtools-mipsel-linux-3.0

  • from Broadcom Corporation. This toolchain is used to compile uClibc and Linux kernel.

2. A MIPS little-endian toolchain compiled with C++ and uClibc support.

  • This toolchain is used to compile linuxigd. CPP_STAGING_DIR in Makefile must be modified to indicate the exact path of this toolchain.

Then, a "make" should suffice to build all GPL components of WGT634U.

USB

This device has a USB2.0 port.

CONFIG_USB_DEVICEFS=y
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_OHCI=m
CONFIG_USB_STORAGE=m

By default, it wants to mount a usb mass_storage device (/dev/sda) on /share/partition1

As you know, this allows one to add an external HDD/USB keychain, etc. [:GPS], BlueTooth?

Serial

There are actually 2 serial headers on the board. For more information on adding a port, see http://www.nslu2-linux.org/wiki/HowTo/AddASerialPort

CONFIG_CMDLINE="root=/dev/ram console=ttyS1,115200"

http://www.personaltelco.net/albums/NetgearWGT634U/dscn3058.thumb.jpg BR

I simply added a serial cable to the outer-most header and booted the device. The bootlog (firmware 1.0.0.11?) can be found [http://personaltelco.net/~jason/wgt634u_bootlog here]. Another log from the latest version which has a number of fixes, including the addition of [http://atheros.com/pt/atheros_XR_whitepaper.pdf Atheros XR] and AR(Addaptive Radio) is located [http://personaltelco.net/~jason/wgt634u_bootlog-1.4.1.9 here].

Battery Power

Measured battery usage: 0.38Amps @12VDC BR Input 12VDC. I've been testing a 12V 4 amp-hour sealed lead-calcium (leadacid) battery. After 20 hours of charging with a 12v 200mAmp charger, the wgt634u was connected to the battery.--DonPark

Time

Volts

9:29pm

12.8

NetgearWgt634u (last edited 2008-02-02 09:56:35 by JasonMcArthur)