Differences between revisions 2 and 3
Revision 2 as of 2003-10-30 21:13:12
Size: 1885
Editor: dsl-208-151-246-210
Comment:
Revision 3 as of 2003-10-30 21:46:11
Size: 29704
Editor: dsl-208-151-246-210
Comment:
Deletions are marked like this. Additions are marked like this.
Line 3: Line 3:
(These are rough notes taken by JeffWillard and from the actions of KeeganQuinn which will be hammered into a step by step recipe) (These are rough notes taken by JeffWillard and DarrinEden from the actions of KeeganQuinn which will be hammered into a step by step recipe)
Line 98: Line 98:

----NoCat Setup-------

To Be Continued............
''' NoCat Setup '''

Here's the raw capture of the stuff I did to the second box.
>There's a little fu that didn't get captured in a vi session, but for
>the most part...
>
>Thanks,
>Darrin
>
>Last login: Tue Oct 28 17:34:04 on ttyp1
>Welcome to Darwin!
>Darrin-Edens-Computer:~ dje$ ssh dje@192.168.100.3
>The authenticity of host '192.168.100.3 (192.168.100.3)' can't be
>established.
>RSA key fingerprint is d8:97:c9:89:35:91:88:e1:cc:27:a4:af:8d:b6:70:2b.
>Are you sure you want to continue connecting (yes/no)? yes
>Warning: Permanently added '192.168.100.3' (RSA) to the list of known
>hosts.
>dje@192.168.100.3's password:
>Linux number-two 2.4.18-bf2.4 #1 Son Apr 14 09:53:28 CEST 2002 i586
>GNU/Linux
>
>The programs included with the Debian GNU/Linux system are free
>software;
>the exact distribution terms for each program are described in the
>individual files in /usr/share/doc/*/copyright.
>
>Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
>permitted by applicable law.
>dje@number-two:~$ clear


>dje@number-two:~$ ifconfig -a
>-bash: ifconfig: command not found
>dje@number-two:~$ /sbin/ifconfig -a
>eth0 Link encap:Ethernet HWaddr 00:C0:F0:17:74:F6
> inet addr:192.168.100.3 Bcast:192.168.100.255
>Mask:255.255.255.0
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:2092 errors:0 dropped:0 overruns:0 frame:0
> TX packets:1102 errors:0 dropped:0 overruns:0 carrier:0
> collisions:2 txqueuelen:100
> RX bytes:2948521 (2.8 MiB) TX bytes:78364 (76.5 KiB)
> Interrupt:10 Base address:0xe880
>
>eth1 Link encap:Ethernet HWaddr 00:00:F8:04:F2:9F
> BROADCAST MULTICAST MTU:1500 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:100
> RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
> Interrupt:11 Base address:0xec00
>
>lo Link encap:Local Loopback
> inet addr:127.0.0.1 Mask:255.0.0.0
> UP LOOPBACK RUNNING MTU:16436 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
>
>dje@number-two:~$ sudo su -
>We trust you have received the usual lecture from the local System
>Administrator. It usually boils down to these two things:
>
> #1) Respect the privacy of others.
> #2) Think before you type.
>
>Password:
>number-two:~# exit
>logout
>dje@number-two:~$ sudo -s
>root@number-two:~# clear
>
>root@number-two:~# apt-get install snmpd dnsmasq
>Reading Package Lists... Done
>Building Dependency Tree... Done
>The following extra packages will be installed:
> libsensors2 libsnmp-base libsnmp5
>Suggested packages:
> dhcp
>Recommended packages:
> lm-sensors-mod-2.8
>The following NEW packages will be installed:
> dnsmasq libsensors2 libsnmp-base libsnmp5 snmpd
>0 upgraded, 5 newly installed, 0 to remove and 0 not upgraded.
>Need to get 1892kB of archives.
>After unpacking 4469kB of additional disk space will be used.
>Do you want to continue? [Y/n]
>Get:1 http://rattler.thebasement.org unstable/main dnsmasq 1.17-1
>[52.7kB]
>Get:2 http://rattler.thebasement.org unstable/main libsensors2 2.8.0-2
>[49.3kB]
>Get:3 http://rattler.thebasement.org unstable/main libsnmp-base 5.0.9-2

>[637kB]
>Get:4 http://rattler.thebasement.org unstable/main libsnmp5 5.0.9-2
>[1084kB]
>Get:5 http://rattler.thebasement.org unstable/main snmpd 5.0.9-2
>[68.6kB]
>Fetched 1892kB in 1m5s (28.7kB/s)
>debconf: unable to initialize frontend: Readline
>debconf: (Can't locate Term/ReadLine.pm in @INC (@INC contains:
>/etc/perl /usr/local/lib/perl/5.8.1 /usr/local/share/perl/5.8.1
>/usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8.1
>/usr/share/perl/5.8.1 /usr/local/lib/site_perl .) at
>/usr/share/perl5/Debconf/FrontEnd/Readline.pm line 5, <> line 5.)
>debconf: falling back to frontend: Teletype
>Selecting previously deselected package dnsmasq.
>(Reading database ... 5942 files and directories currently installed.)
>Unpacking dnsmasq (from .../dnsmasq_1.17-1_i386.deb) ...
>Selecting previously deselected package libsensors2.
>Unpacking libsensors2 (from .../libsensors2_2.8.0-2_i386.deb) ...
>Selecting previously deselected package libsnmp-base.
>Unpacking libsnmp-base (from .../libsnmp-base_5.0.9-2_all.deb) ...
>Selecting previously deselected package libsnmp5.
>Unpacking libsnmp5 (from .../libsnmp5_5.0.9-2_i386.deb) ...
>Selecting previously deselected package snmpd.
>Unpacking snmpd (from .../snmpd_5.0.9-2_i386.deb) ...
>Setting up dnsmasq (1.17-1) ...
>Starting caching dns forwarder: dnsmasq.
>
>Setting up libsensors2 (2.8.0-2) ...
>Setting up libsnmp-base (5.0.9-2) ...
>
>Setting up libsnmp5 (5.0.9-2) ...
>
>Setting up snmpd (5.0.9-2) ...
>Starting network management services: snmpd.
>
>root@number-two:~# apt-get install perl make gnupg
>Reading Package Lists... Done
>Building Dependency Tree... Done
>The following extra packages will be installed:
> libdb4.0 libgdbm3 perl-modules
>Suggested packages:
> xloadimage libterm-readline-perl-perl
>The following NEW packages will be installed:
> gnupg libdb4.0 libgdbm3 make perl perl-modules
>0 upgraded, 6 newly installed, 0 to remove and 0 not upgraded.
>Need to get 7748kB of archives.
>After unpacking 27.4MB of additional disk space will be used.
>Do you want to continue? [Y/n]
>Get:1 http://rattler.thebasement.org unstable/main libgdbm3 1.8.3-2
>[21.3kB]
>Get:2 http://rattler.thebasement.org unstable/main gnupg 1.2.3-1
>[1590kB]
>Get:3 http://rattler.thebasement.org unstable/main libdb4.0 4.0.14-1.3

>[302kB]
>Get:4 http://rattler.thebasement.org unstable/main make 3.80-4 [349kB]
>Get:5 http://rattler.thebasement.org unstable/main perl-modules 5.8.1-4
>[2156kB]
>Get:6 http://rattler.thebasement.org unstable/main perl 5.8.1-4 [3330kB]
>Fetched 7748kB in 1m44s (73.9kB/s)
>debconf: unable to initialize frontend: Readline
>debconf: (Can't locate Term/ReadLine.pm in @INC (@INC contains:
>/etc/perl /usr/local/lib/perl/5.8.1 /usr/local/share/perl/5.8.1
>/usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8.1
>/usr/share/perl/5.8.1 /usr/local/lib/site_perl .) at
>/usr/share/perl5/Debconf/FrontEnd/Readline.pm line 5, <> line 6.)
>debconf: falling back to frontend: Teletype
>Selecting previously deselected package libgdbm3.
>(Reading database ... 6089 files and directories currently installed.)
>Unpacking libgdbm3 (from .../libgdbm3_1.8.3-2_i386.deb) ...
>Selecting previously deselected package gnupg.
>Unpacking gnupg (from .../gnupg_1.2.3-1_i386.deb) ...
>Selecting previously deselected package libdb4.0.
>Unpacking libdb4.0 (from .../libdb4.0_4.0.14-1.3_i386.deb) ...
>Selecting previously deselected package make.
>Unpacking make (from .../archives/make_3.80-4_i386.deb) ...
>Selecting previously deselected package perl-modules.
>Unpacking perl-modules (from .../perl-modules_5.8.1-4_all.deb) ...
>Selecting previously deselected package perl.
>Unpacking perl (from .../archives/perl_5.8.1-4_i386.deb) ...
>Setting up libgdbm3 (1.8.3-2) ...
>Setting up gnupg (1.2.3-1) ...
>Setting up libdb4.0 (4.0.14-1.3) ...
>
>Setting up make (3.80-4) ...
>
>Setting up perl-modules (5.8.1-4) ...
>Setting up perl (5.8.1-4) ...

>root@number-two:~# deporphan -a
>bash: deporphan: command not found
>root@number-two:~# deborphan -a
>main/admin sudo
>main/net ssh
>main/admin pciutils
>main/utils fileutils
>main/utils shellutils
>main/utils textutils
>main/utils gnupg
>main/net dnsmasq
>main/net snmpd
>main/base lilo
>main/net iptables
>main/devel make
>main/editors nvi
>main/admin deborphan
>root@number-two:~# pwd
>/home/dje
>root@number-two:~# ftp nocat.net
>bash: ftp: command not found
>root@number-two:~# ssh dje@decentric.com
>
>root@number-two:~# ssh dje@decentric.com
>
>root@number-two:~# ssh dje@decentric.com
>The authenticity of host 'decentric.com (216.242.178.113)' can't be
>established.
>RSA key fingerprint is da:75:0b:35:f3:18:82:08:3d:d3:7e:58:20:2a:0c:82.
>Are you sure you want to continue connecting (yes/no)? yes

>list of known hosts.
>dje@decentric.com's password:
>Last login: Tue Oct 28 20:32:22 2003 from 198.107.1.11
>[dje@server1 dje]$ lynx http://www.nocat.net
>[dje@server1 dje]$ ls
>NoCatAuth-nightly.tgz base/ bin/ dev/ musique/ subscriptions.opml

>tmp/ www@
>[dje@server1 dje]$ exit
>logout
>
>Connection to decentric.com closed.
>root@number-two:~# scp dje@decentric.com:NoCat* .
>dje@decentric.com's password:
>NoCatAuth-nightly.tgz 100%

> 89KB 41.3KB/s 00:02
>root@number-two:~# ls
>NoCatAuth-nightly.tgz
>root@number-two:~# tar xvfz NoCatAuth-nightly.tgz
>NoCatAuth-nightly/
>NoCatAuth-nightly/bin/
>NoCatAuth-nightly/bin/detect-fw.sh
>NoCatAuth-nightly/bin/admintool
>NoCatAuth-nightly/bin/gateway
>NoCatAuth-nightly/bin/vtun.sh
>NoCatAuth-nightly/doc/
>NoCatAuth-nightly/doc/nocatrfc.txt
>NoCatAuth-nightly/doc/working.iptables
>NoCatAuth-nightly/doc/Introduction.txt
>NoCatAuth-nightly/doc/nocat-conf.txt
>NoCatAuth-nightly/doc/SameMachine.txt
>NoCatAuth-nightly/doc/AuthService.txt
>NoCatAuth-nightly/etc/
>NoCatAuth-nightly/etc/goodbye.html
>NoCatAuth-nightly/etc/group
>NoCatAuth-nightly/etc/README
>NoCatAuth-nightly/etc/pam.conf
>NoCatAuth-nightly/etc/exception
>NoCatAuth-nightly/etc/nocat.schema
>NoCatAuth-nightly/etc/groupadm
>NoCatAuth-nightly/etc/vtund.conf
>NoCatAuth-nightly/etc/logout.html
>NoCatAuth-nightly/etc/fw-wrap.c
>NoCatAuth-nightly/etc/httpd.conf
>NoCatAuth-nightly/etc/passwd
>NoCatAuth-nightly/etc/portforward.sample
>NoCatAuth-nightly/etc/nocat.rc
>NoCatAuth-nightly/etc/linux-2.4.config
>NoCatAuth-nightly/lib/
>NoCatAuth-nightly/lib/NoCat/
>NoCatAuth-nightly/lib/NoCat/Group.pm
>NoCatAuth-nightly/lib/NoCat/User.pm
>NoCatAuth-nightly/lib/NoCat/Gateway.pm
>NoCatAuth-nightly/lib/NoCat/Peer.pm
>NoCatAuth-nightly/lib/NoCat/Source.pm
>NoCatAuth-nightly/lib/NoCat/Source/
>NoCatAuth-nightly/lib/NoCat/Source/LDAP.pm
>NoCatAuth-nightly/lib/NoCat/Source/NIS.pm
>NoCatAuth-nightly/lib/NoCat/Source/PAM.pm
>NoCatAuth-nightly/lib/NoCat/Source/RADIUS.pm
>NoCatAuth-nightly/lib/NoCat/Source/IMAP.pm
>NoCatAuth-nightly/lib/NoCat/Source/Samba.pm
>NoCatAuth-nightly/lib/NoCat/Source/Passwd.pm
>NoCatAuth-nightly/lib/NoCat/Source/DBI.pm
>NoCatAuth-nightly/lib/NoCat/AuthService.pm
>NoCatAuth-nightly/lib/NoCat/Gateway/
>NoCatAuth-nightly/lib/NoCat/Gateway/Open.pm
>NoCatAuth-nightly/lib/NoCat/Gateway/Passive.pm
>NoCatAuth-nightly/lib/NoCat/Gateway/Captive.pm
>NoCatAuth-nightly/lib/NoCat/Firewall.pm
>NoCatAuth-nightly/lib/NoCat/Message.pm
>NoCatAuth-nightly/lib/NoCat.pm
>NoCatAuth-nightly/pgp/
>NoCatAuth-nightly/pgp/trustedkeys.gpg
>NoCatAuth-nightly/gateway.conf
>NoCatAuth-nightly/BUGS
>NoCatAuth-nightly/NEWS
>NoCatAuth-nightly/TODO
>NoCatAuth-nightly/authserv.conf
>NoCatAuth-nightly/upgrade-0.80-db.pl
>NoCatAuth-nightly/Makefile
>NoCatAuth-nightly/LICENSE
>NoCatAuth-nightly/README
>NoCatAuth-nightly/libexec/
>NoCatAuth-nightly/libexec/pf/
>NoCatAuth-nightly/libexec/pf/reset.fw
>NoCatAuth-nightly/libexec/pf/dump.fw
>NoCatAuth-nightly/libexec/pf/access.fw
>NoCatAuth-nightly/libexec/pf/initialize.fw
>NoCatAuth-nightly/libexec/pf/clear.fw
>NoCatAuth-nightly/libexec/ipchains/
>NoCatAuth-nightly/libexec/ipchains/reset.fw
>NoCatAuth-nightly/libexec/ipchains/dump.fw
>NoCatAuth-nightly/libexec/ipchains/access.fw
>NoCatAuth-nightly/libexec/ipchains/initialize.fw
>NoCatAuth-nightly/libexec/ipchains/clear.fw
>NoCatAuth-nightly/libexec/ipfilter/
>NoCatAuth-nightly/libexec/ipfilter/initialize.fw
>NoCatAuth-nightly/libexec/iptables/
>NoCatAuth-nightly/libexec/iptables/reset.fw
>NoCatAuth-nightly/libexec/iptables/dump.fw
>NoCatAuth-nightly/libexec/iptables/access.fw
>NoCatAuth-nightly/libexec/iptables/initialize.fw
>NoCatAuth-nightly/libexec/iptables/throttle.fw
>NoCatAuth-nightly/libexec/iptables/clear.fw
>NoCatAuth-nightly/libexec/loopback/
>NoCatAuth-nightly/libexec/loopback/dump.fw
>NoCatAuth-nightly/libexec/loopback/initialize.fw
>NoCatAuth-nightly/libexec/loopback/clear.fw
>NoCatAuth-nightly/test.sh
>NoCatAuth-nightly/htdocs/
>NoCatAuth-nightly/htdocs/fatal.html
>NoCatAuth-nightly/htdocs/renew_pasv.html
>NoCatAuth-nightly/htdocs/expired.html
>NoCatAuth-nightly/htdocs/login_ok.html
>NoCatAuth-nightly/htdocs/renew.html
>NoCatAuth-nightly/htdocs/images/
>NoCatAuth-nightly/htdocs/images/auth_logo.gif
>NoCatAuth-nightly/htdocs/images/update.gif
>NoCatAuth-nightly/htdocs/images/login.gif
>NoCatAuth-nightly/htdocs/images/continue.gif
>NoCatAuth-nightly/htdocs/images/skip.gif
>NoCatAuth-nightly/htdocs/images/reset.gif
>NoCatAuth-nightly/htdocs/images/register.gif
>NoCatAuth-nightly/htdocs/images/logout.gif
>NoCatAuth-nightly/htdocs/logout.html
>NoCatAuth-nightly/htdocs/status.html
>NoCatAuth-nightly/htdocs/login-no-skip.html
>NoCatAuth-nightly/htdocs/register_ok.html
>NoCatAuth-nightly/htdocs/register.html
>NoCatAuth-nightly/htdocs/login.html
>NoCatAuth-nightly/htdocs/splash.html
>NoCatAuth-nightly/htdocs/update.html
>NoCatAuth-nightly/INSTALL
>NoCatAuth-nightly/cgi-bin/
>NoCatAuth-nightly/cgi-bin/login
>NoCatAuth-nightly/cgi-bin/admlogin
>NoCatAuth-nightly/cgi-bin/update
>NoCatAuth-nightly/cgi-bin/register
>root@number-two:~# ls
>NoCatAuth-nightly NoCatAuth-nightly.tgz
>root@number-two:~# wget
>bash: wget: command not found
>root@number-two:~# rm NoCatAuth-nightly
>rm: cannot remove `NoCatAuth-nightly': Is a directory
>root@number-two:~# rm NoCatAuth-nightly.tgz
>root@number-two:~# ls
>NoCatAuth-nightly
>root@number-two:~# apt-get install wget
>Reading Package Lists... Done
>Building Dependency Tree... Done
>The following NEW packages will be installed:
> wget
>0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
>Need to get 416kB of archives.
>After unpacking 1487kB of additional disk space will be used.
>Get:1 http://rattler.thebasement.org unstable/main wget 1.9-1 [416kB]
>Fetched 416kB in 1s (250kB/s)
>Selecting previously deselected package wget.
>(Reading database ... 7464 files and directories currently installed.)
>Unpacking wget (from .../archives/wget_1.9-1_i386.deb) ...
>Setting up wget (1.9-1) ...
>
>root@number-two:~# clear
>
>root@number-two:~# wget
>http://rune.thebasement.org/~ice/tmp/stable-01.patch
>--13:24:29-- http://rune.thebasement.org/%7Eice/tmp/stable-01.patch
> => `stable-01.patch'
>Resolving rune.thebasement.org... 209.162.205.200
>Connecting to rune.thebasement.org[209.162.205.200]:80... connected.
>HTTP request sent, awaiting response... 200 OK
>Length: 1,225 [text/plain]
>
>100%[========================================================>] 1,225

> --.--K/s
>
>root@number-two:~# ls
>NoCatAuth-nightly stable-01.patch
>root@number-two:~# cd NoCatAuth-nightly/
>root@number-two:~/NoCatAuth-nightly# ls
>BUGS Makefile TODO cgi-bin gateway.conf libexec
>upgrade-0.80-db.pl
>INSTALL NEWS authserv.conf doc htdocs pgp
>LICENSE README bin etc lib test.sh
>root@number-two:~/NoCatAuth-nightly# patch -p1 < ../stable-01.patch
>bash: patch: command not found
>root@number-two:~/NoCatAuth-nightly# apt-get install patch
>Reading Package Lists... Done
>Building Dependency Tree... Done
>The following NEW packages will be installed:
> patch
>0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
>Need to get 92.3kB of archives.
>After unpacking 184kB of additional disk space will be used.
>Get:1 http://rattler.thebasement.org unstable/main patch 2.5.9-1
>[92.3kB]
>Fetched 92.3kB in 0s (111kB/s)
>Selecting previously deselected package patch.
>(Reading database ... 7509 files and directories currently installed.)
>Unpacking patch (from .../patch_2.5.9-1_i386.deb) ...
>Setting up patch (2.5.9-1) ...
>root@number-two:~/NoCatAuth-nightly# patch -p1 < ../stable-01.patch
>patching file bin/gateway
>patching file lib/NoCat/Gateway.pm
>root@number-two:~/NoCatAuth-nightly# ls
>BUGS Makefile TODO cgi-bin gateway.conf libexec
>upgrade-0.80-db.pl
>INSTALL NEWS authserv.conf doc htdocs pgp
>LICENSE README bin etc lib test.sh
>root@number-two:~/NoCatAuth-nightly# vi /etc/kernel-img.conf
>root@number-two:~/NoCatAuth-nightly# more /etc/kernel-img.conf
>do_symlinks = No
>do_initrd = Yes
>
>postinst_hook = /sbin/update-grub
>postrm_hook = /sbin/update-grub
>do_bootloader = No
>root@number-two:~/NoCatAuth-nightly# apt-get install kernel-image-2.4-K6
>Reading Package Lists... Done
>Building Dependency Tree... Done
>The following extra packages will be installed:
> cpio cramfsprogs dash initrd-tools kernel-image-2.4-k6
>kernel-image-2.4.22-1-k6
> module-init-tools
>Suggested packages:
> kernel-doc-2.4.22 pcmcia-modules-2.4.22-1-k6
>The following NEW packages will be installed:
> cpio cramfsprogs dash initrd-tools kernel-image-2.4-k6
>kernel-image-2.4.22-1-k6
> module-init-tools
>0 upgraded, 7 newly installed, 0 to remove and 0 not upgraded.
>Need to get 11.4MB of archives.
>After unpacking 30.5MB of additional disk space will be used.
>Do you want to continue? [Y/n]
>Get:1 http://rattler.thebasement.org unstable/main dash 0.4.18 [77.4kB]
>Get:2 http://rattler.thebasement.org unstable/main cpio 2.5-1.1 [64.3kB]
>Get:3 http://rattler.thebasement.org unstable/main cramfsprogs 1.1-4
>[19.6kB]
>Get:4 http://rattler.thebasement.org unstable/main module-init-tools
>0.9.15-pre2-2 [66.3kB]
>Get:5 http://rattler.thebasement.org unstable/main initrd-tools 0.1.54

>[21.1kB]
>Get:6 http://rattler.thebasement.org unstable/main
>kernel-image-2.4.22-1-k6 2.4.22-3 [11.1MB]
>Get:7 http://rattler.thebasement.org unstable/main kernel-image-2.4-k6

>2.4.22-3 [6198B]
>Fetched 11.4MB in 29s (386kB/s)
>Preconfiguring packages ...
>Selecting previously deselected package dash.
>(Reading database ... 7518 files and directories currently installed.)
>Unpacking dash (from .../archives/dash_0.4.18_i386.deb) ...
>Selecting previously deselected package cpio.
>Unpacking cpio (from .../archives/cpio_2.5-1.1_i386.deb) ...
>Selecting previously deselected package cramfsprogs.
>Unpacking cramfsprogs (from .../cramfsprogs_1.1-4_i386.deb) ...
>Selecting previously deselected package module-init-tools.
>Unpacking module-init-tools (from
>.../module-init-tools_0.9.15-pre2-2_i386.deb) ...
>Selecting previously deselected package initrd-tools.
>Unpacking initrd-tools (from .../initrd-tools_0.1.54_all.deb) ...
>Selecting previously deselected package kernel-image-2.4.22-1-k6.
>Unpacking kernel-image-2.4.22-1-k6 (from
>.../kernel-image-2.4.22-1-k6_2.4.22-3_i386.deb) ...
>Selecting previously deselected package kernel-image-2.4-k6.
>Unpacking kernel-image-2.4-k6 (from
>.../kernel-image-2.4-k6_2.4.22-3_i386.deb) ...
>Setting up dash (0.4.18) ...
>
>Setting up cpio (2.5-1.1) ...
>
>Setting up cramfsprogs (1.1-4) ...
>
>Setting up module-init-tools (0.9.15-pre2-2) ...
>
>Setting up initrd-tools (0.1.54) ...
>
>Setting up kernel-image-2.4.22-1-k6 (2.4.22-3) ...
>/initrd.img does not exist. Installing from scratch, eh?
>Or maybe you don't want a symbolic link here. Hmm? Lets See.
>
>Setting up kernel-image-2.4-k6 (2.4.22-3) ...
>root@number-two:~/NoCatAuth-nightly# dpkg -P lilo
>(Reading database ... 8834 files and directories currently installed.)
>Removing lilo ...
>Purging configuration files for lilo ...
>root@number-two:~/NoCatAuth-nightly# apt-get install grub
>Reading Package Lists... Done
>Building Dependency Tree... Done
>Suggested packages:
> grub-doc
>The following NEW packages will be installed:
> grub
>0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
>Need to get 282kB of archives.
>After unpacking 635kB of additional disk space will be used.
>Get:1 http://rattler.thebasement.org unstable/main grub
>0.93+cvs20031021-1 [282kB]
>Fetched 282kB in 1s (281kB/s)
>Selecting previously deselected package grub.
>(Reading database ... 8795 files and directories currently installed.)
>Unpacking grub (from .../grub_0.93+cvs20031021-1_i386.deb) ...
>Setting up grub (0.93+cvs20031021-1) ...
>root@number-two:~/NoCatAuth-nightly# grub-install /dev/hda
>Probing devices to guess BIOS drives. This may take a long time.
>Installation finished. No error reported.
>This is the contents of the device map /boot/grub/device.map.
>Check if this is correct or not. If any of the lines is incorrect,
>fix it and re-run the script `grub-install'.
>
>(fd0) /dev/fd0
>(hd0) /dev/hda
>root@number-two:~/NoCatAuth-nightly# update-grub
>Searching for GRUB installation directory ... found: /boot/grub .
>Testing for an existing GRUB menu.list file...
>
>Could not find /boot/grub/menu.lst file. Would you like
>/boot/grub/menu.lst generated for you? (y/N) y
>Found kernel: /boot/vmlinuz-2.4.22-1-k6
>Found kernel: /boot/vmlinuz-2.4.18-bf2.4
>Updating /boot/grub/menu.lst ... done
>
>root@number-two:~/NoCatAuth-nightly# update-grub
>Searching for GRUB installation directory ... found: /boot/grub .
>Testing for an existing GRUB menu.list file... found:
>/boot/grub/menu.lst .
>Found kernel: /boot/vmlinuz-2.4.22-1-k6
>Found kernel: /boot/vmlinuz-2.4.18-bf2.4
>Updating /boot/grub/menu.lst ... done
>
>root@number-two:~/NoCatAuth-nightly# reboot
>
>Broadcast message from root (pts/0) (Tue Oct 28 13:32:52 2003):
>
>The system is going down for reboot NOW!
>root@number-two:~/NoCatAuth-nightly# Connection to 192.168.100.3 closed

>by remote host.
>Connection to 192.168.100.3 closed.
>Darrin-Edens-Computer:~ dje$ ssh dje@192.168.100.3
>^C
>Darrin-Edens-Computer:~ dje$ ssh dje@192.168.100.3
>dje@192.168.100.3's password:
>Linux number-two 2.4.22-1-k6 #5 Sat Oct 4 14:38:05 EST 2003 i586
>GNU/Linux
>
>The programs included with the Debian GNU/Linux system are free
>software;
>the exact distribution terms for each program are described in the
>individual files in /usr/share/doc/*/copyright.
>
>Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
>permitted by applicable law.
>Last login: Tue Oct 28 13:10:21 2003 from 192.168.100.4
>dje@number-two:~$ uname -a
>Linux number-two 2.4.22-1-k6 #5 Sat Oct 4 14:38:05 EST 2003 i586
>GNU/Linux
>dje@number-two:~$ sudo -s
>Password:
>root@number-two:~# apt-get install ssmtp
>Reading Package Lists... Done
>Building Dependency Tree... Done
>The following packages will be REMOVED:
> exim
>The following NEW packages will be installed:
> ssmtp
>0 upgraded, 1 newly installed, 1 to remove and 0 not upgraded.
>Need to get 26.4kB of archives.
>After unpacking 1425kB disk space will be freed.
>Do you want to continue? [Y/n]
>Get:1 http://rattler.thebasement.org unstable/main ssmtp 2.60.4 [26.4kB]
>Fetched 26.4kB in 0s (40.1kB/s)
>Preconfiguring packages ...
>Configuring Ssmtp
>-----------------
>
> The mail configuration file /etc/ssmtp/ssmtp.conf can be automatically
> updated on each upgrade with the information supplied to the debconf
> database. If you do not want this to happen (ie/ you want to maintain
> control of this file yourself) then set this option to have the program
> never touch this file.
>
>:-) Automatically overwrite config files? y
>
>
> Mail sent to a local user whose UID is less than 1000 will instead be
> sent here. This is useful for daemons which mail reports to root and
> other system UIDs.
>
>:-) Who gets mail for userids < 1000? dje
>
>
> This sets the host to which mail is delivered. The actual machine
> name is required; no MX records are consulted. Commonly, mailhosts
> are named "mail.domain.com".
>
>:-) Name of your mailhub? mail.personaltelco.net
>
>
> ssmtp will use "username@REWRITEDOMAIN" as the default From: address
> for outgoing mail which contains only a local username.
>
>:-) What domain to masquerade as? personaltelco.net
>
>
> A "positive" response will permit local users to enter any From: line
> in their messages without it being mangled, and cause ssmtp to rewrite
> the envelope header with that address. A "negative" response will
> disallow this, and use only the default address or addresses set in
> /etc/ssmtp/revaliases.
>
>:-) Allow override of From: line in email header? y
>
>
>dpkg: exim: dependency problems, but removing anyway as you request:
> mailx depends on mail-transport-agent; however:
> Package mail-transport-agent is not installed.
> Package exim which provides mail-transport-agent is to be removed.
>(Reading database ... 8836 files and directories currently installed.)
>Removing exim ...
>Selecting previously deselected package ssmtp.
>(Reading database ... 8773 files and directories currently installed.)
>Unpacking ssmtp (from .../archives/ssmtp_2.60.4_i386.deb) ...
>Setting up ssmtp (2.60.4) ...
>
>root@number-two:~# deborphan
>libident
>libpcre3
>root@number-two:~# dpkg -P libident libpcre3
>(Reading database ... 8790 files and directories currently installed.)
>Removing libident ...
>Removing libpcre3 ...
>Purging configuration files for libpcre3 ...
>root@number-two:~# deborphan
>root@number-two:~# pwd
>/home/dje
>root@number-two:~# ls
>NoCatAuth-nightly stable-01.patch
>root@number-two:~# cd NoCatAuth-nightly/
>root@number-two:~/NoCatAuth-nightly# ls
>BUGS Makefile TODO cgi-bin gateway.conf libexec
>upgrade-0.80-db.pl
>INSTALL NEWS authserv.conf doc htdocs pgp
>LICENSE README bin etc lib test.sh
>root@number-two:~/NoCatAuth-nightly# make gateway
>Looking for gpgv...
>Checking for firewall compatibility: /sbin/iptables found.
>libexec/iptables/access.fw -> bin/access.fw
>libexec/iptables/clear.fw -> bin/clear.fw
>libexec/iptables/clear.fw -> bin/clear.fw
>libexec/iptables/dump.fw -> bin/dump.fw
>libexec/iptables/initialize.fw -> bin/initialize.fw
>libexec/iptables/reset.fw -> bin/reset.fw
>libexec/iptables/throttle.fw -> bin/throttle.fw
>/sbin/iptables -> bin/iptables
>[ -d /usr/local/nocat ] || mkdir -p /usr/local/nocat
>chmod 755 /usr/local/nocat
>[ -d /usr/local/nocat/htdocs ] || cp -R htdocs /usr/local/nocat
>cp -R bin /usr/local/nocat
>Installing NoCat to /usr/local/nocat...
>cp -R lib pgp /usr/local/nocat
>[ -f /usr/local/nocat/nocat.conf ] || \
> perl -pe 's#/usr/local/nocat#/usr/local/nocat#g' gateway.conf \
> > /usr/local/nocat/nocat.conf
>
>-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
> Congratulations!
> NoCat gateway is installed. To start it, check
> /usr/local/nocat/nocat.conf, then run bin/gateway
> as root.
>-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
>
>root@number-two:~/NoCatAuth-nightly# shutdown -h now
>
>Broadcast message from root (pts/0) (Tue Oct 28 13:39:32 2003):
>
>The system is going down for system halt NOW!
>root@number-two:~/NoCatAuth-nightly# Connection to 192.168.100.3 closed

>by remote host.
>Connection to 192.168.100.3 closed.
>Darrin-Edens-Computer:~ dje$











Here Is will be the step needed to install a clean, effecient and viable install of Debian, NoCat and related apps to turn a NewCloneArmyBox into a powerfull node on the PTPnet

(These are rough notes taken by JeffWillard and DarrinEden from the actions of KeeganQuinn which will be hammered into a step by step recipe)

The Debian Install

at boot prompt: "bf24" (start 2.4 kernel vs. 2.2)

select Language and keyboard

hard disk (/dev/hda) Create swap partition (128M) Root partition --bootable (128Mb) logic partition (.5 Gig) 2nd logic (.5 Gig) home (whatever is left over) ---all FS type Linux exect swap---linux swap

Init swap partition init pri (ext3) mount root filesystem

repeat above for var,usr,and home

kernel install

configure device drivers (devices/net) nic (de4x5)

configure network


make system bootable --mbr

reboot

set time set root pwd remove pcmcia packages? yes

atp configuration ---edit by hand

"deb http://http.us.debian.or/debian unstable main" per Keegan: using unstable means just that..if you have issues....take a 24hr breather and attempt again

no additional sources no security updates

run taskel? --no

deselect? --no

update configuration file? yes

Configuring debconf select Readline select medium don't touch keymap system wide readible directories? yes serial--autosave once

upgrade glibc? Y

update system? yes

mail config? / 5

mandb? --yes

rebuild database? --yes

erase any additional .deb files? --yes

"apt-get update"

"apt-get install deborphan"

"deborphan"

"dbkp -P <all packages listed ---space in between>"

"deborphan -a"

"dpkg -P <all packages you don't want>"

"deborphan -a"

repeat several times to ensure all packages are removed that you don't want

NoCat Setup

Here's the raw capture of the stuff I did to the second box. >There's a little fu that didn't get captured in a vi session, but for >the most part... > >Thanks, >Darrin > >Last login: Tue Oct 28 17:34:04 on ttyp1 >Welcome to Darwin! >Darrin-Edens-Computer:~ dje$ ssh dje@192.168.100.3 >The authenticity of host '192.168.100.3 (192.168.100.3)' can't be >established. >RSA key fingerprint is d8:97:c9:89:35:91:88:e1:cc:27:a4:af:8d:b6:70:2b. >Are you sure you want to continue connecting (yes/no)? yes >Warning: Permanently added '192.168.100.3' (RSA) to the list of known >hosts. >dje@192.168.100.3's password: >Linux number-two 2.4.18-bf2.4 #1 Son Apr 14 09:53:28 CEST 2002 i586 >GNU/Linux > >The programs included with the Debian GNU/Linux system are free >software; >the exact distribution terms for each program are described in the >individual files in /usr/share/doc/*/copyright. > >Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent >permitted by applicable law. >dje@number-two:~$ clear

>dje@number-two:~$ ifconfig -a >-bash: ifconfig: command not found >dje@number-two:~$ /sbin/ifconfig -a >eth0 Link encap:Ethernet HWaddr 00:C0:F0:17:74:F6 > inet addr:192.168.100.3 Bcast:192.168.100.255 >Mask:255.255.255.0 > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:2092 errors:0 dropped:0 overruns:0 frame:0 > TX packets:1102 errors:0 dropped:0 overruns:0 carrier:0 > collisions:2 txqueuelen:100 > RX bytes:2948521 (2.8 MiB) TX bytes:78364 (76.5 KiB) > Interrupt:10 Base address:0xe880 > >eth1 Link encap:Ethernet HWaddr 00:00:F8:04:F2:9F > BROADCAST MULTICAST MTU:1500 Metric:1 > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:100 > RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) > Interrupt:11 Base address:0xec00 > >lo Link encap:Local Loopback > inet addr:127.0.0.1 Mask:255.0.0.0 > UP LOOPBACK RUNNING MTU:16436 Metric:1 > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:0 > RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) > >dje@number-two:~$ sudo su - >We trust you have received the usual lecture from the local System >Administrator. It usually boils down to these two things: > > #1) Respect the privacy of others. > #2) Think before you type. > >Password: >number-two:~# exit >logout >dje@number-two:~$ sudo -s >root@number-two:~# clear > >root@number-two:~# apt-get install snmpd dnsmasq >Reading Package Lists... Done >Building Dependency Tree... Done >The following extra packages will be installed: > libsensors2 libsnmp-base libsnmp5 >Suggested packages: > dhcp >Recommended packages: > lm-sensors-mod-2.8 >The following NEW packages will be installed: > dnsmasq libsensors2 libsnmp-base libsnmp5 snmpd >0 upgraded, 5 newly installed, 0 to remove and 0 not upgraded. >Need to get 1892kB of archives. >After unpacking 4469kB of additional disk space will be used. >Do you want to continue? [Y/n] >Get:1 http://rattler.thebasement.org unstable/main dnsmasq 1.17-1 >[52.7kB] >Get:2 http://rattler.thebasement.org unstable/main libsensors2 2.8.0-2 >[49.3kB] >Get:3 http://rattler.thebasement.org unstable/main libsnmp-base 5.0.9-2

>[637kB] >Get:4 http://rattler.thebasement.org unstable/main libsnmp5 5.0.9-2 >[1084kB] >Get:5 http://rattler.thebasement.org unstable/main snmpd 5.0.9-2 >[68.6kB] >Fetched 1892kB in 1m5s (28.7kB/s) >debconf: unable to initialize frontend: Readline >debconf: (Can't locate Term/ReadLine.pm in @INC (@INC contains: >/etc/perl /usr/local/lib/perl/5.8.1 /usr/local/share/perl/5.8.1 >/usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8.1 >/usr/share/perl/5.8.1 /usr/local/lib/site_perl .) at >/usr/share/perl5/Debconf/FrontEnd/Readline.pm line 5, <> line 5.) >debconf: falling back to frontend: Teletype >Selecting previously deselected package dnsmasq. >(Reading database ... 5942 files and directories currently installed.) >Unpacking dnsmasq (from .../dnsmasq_1.17-1_i386.deb) ... >Selecting previously deselected package libsensors2. >Unpacking libsensors2 (from .../libsensors2_2.8.0-2_i386.deb) ... >Selecting previously deselected package libsnmp-base. >Unpacking libsnmp-base (from .../libsnmp-base_5.0.9-2_all.deb) ... >Selecting previously deselected package libsnmp5. >Unpacking libsnmp5 (from .../libsnmp5_5.0.9-2_i386.deb) ... >Selecting previously deselected package snmpd. >Unpacking snmpd (from .../snmpd_5.0.9-2_i386.deb) ... >Setting up dnsmasq (1.17-1) ... >Starting caching dns forwarder: dnsmasq. > >Setting up libsensors2 (2.8.0-2) ... >Setting up libsnmp-base (5.0.9-2) ... > >Setting up libsnmp5 (5.0.9-2) ... > >Setting up snmpd (5.0.9-2) ... >Starting network management services: snmpd. > >root@number-two:~# apt-get install perl make gnupg >Reading Package Lists... Done >Building Dependency Tree... Done >The following extra packages will be installed: > libdb4.0 libgdbm3 perl-modules >Suggested packages: > xloadimage libterm-readline-perl-perl >The following NEW packages will be installed: > gnupg libdb4.0 libgdbm3 make perl perl-modules >0 upgraded, 6 newly installed, 0 to remove and 0 not upgraded. >Need to get 7748kB of archives. >After unpacking 27.4MB of additional disk space will be used. >Do you want to continue? [Y/n] >Get:1 http://rattler.thebasement.org unstable/main libgdbm3 1.8.3-2 >[21.3kB] >Get:2 http://rattler.thebasement.org unstable/main gnupg 1.2.3-1 >[1590kB] >Get:3 http://rattler.thebasement.org unstable/main libdb4.0 4.0.14-1.3

>[302kB] >Get:4 http://rattler.thebasement.org unstable/main make 3.80-4 [349kB] >Get:5 http://rattler.thebasement.org unstable/main perl-modules 5.8.1-4 >[2156kB] >Get:6 http://rattler.thebasement.org unstable/main perl 5.8.1-4 [3330kB] >Fetched 7748kB in 1m44s (73.9kB/s) >debconf: unable to initialize frontend: Readline >debconf: (Can't locate Term/ReadLine.pm in @INC (@INC contains: >/etc/perl /usr/local/lib/perl/5.8.1 /usr/local/share/perl/5.8.1 >/usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8.1 >/usr/share/perl/5.8.1 /usr/local/lib/site_perl .) at >/usr/share/perl5/Debconf/FrontEnd/Readline.pm line 5, <> line 6.) >debconf: falling back to frontend: Teletype >Selecting previously deselected package libgdbm3. >(Reading database ... 6089 files and directories currently installed.) >Unpacking libgdbm3 (from .../libgdbm3_1.8.3-2_i386.deb) ... >Selecting previously deselected package gnupg. >Unpacking gnupg (from .../gnupg_1.2.3-1_i386.deb) ... >Selecting previously deselected package libdb4.0. >Unpacking libdb4.0 (from .../libdb4.0_4.0.14-1.3_i386.deb) ... >Selecting previously deselected package make. >Unpacking make (from .../archives/make_3.80-4_i386.deb) ... >Selecting previously deselected package perl-modules. >Unpacking perl-modules (from .../perl-modules_5.8.1-4_all.deb) ... >Selecting previously deselected package perl. >Unpacking perl (from .../archives/perl_5.8.1-4_i386.deb) ... >Setting up libgdbm3 (1.8.3-2) ... >Setting up gnupg (1.2.3-1) ... >Setting up libdb4.0 (4.0.14-1.3) ... > >Setting up make (3.80-4) ... > >Setting up perl-modules (5.8.1-4) ... >Setting up perl (5.8.1-4) ...

>root@number-two:~# deporphan -a >bash: deporphan: command not found >root@number-two:~# deborphan -a >main/admin sudo >main/net ssh >main/admin pciutils >main/utils fileutils >main/utils shellutils >main/utils textutils >main/utils gnupg >main/net dnsmasq >main/net snmpd >main/base lilo >main/net iptables >main/devel make >main/editors nvi >main/admin deborphan >root@number-two:~# pwd >/home/dje >root@number-two:~# ftp nocat.net >bash: ftp: command not found >root@number-two:~# ssh dje@decentric.com > >root@number-two:~# ssh dje@decentric.com > >root@number-two:~# ssh dje@decentric.com >The authenticity of host 'decentric.com (216.242.178.113)' can't be >established. >RSA key fingerprint is da:75:0b:35:f3:18:82:08:3d:d3:7e:58:20:2a:0c:82. >Are you sure you want to continue connecting (yes/no)? yes

>list of known hosts. >dje@decentric.com's password: >Last login: Tue Oct 28 20:32:22 2003 from 198.107.1.11 >[dje@server1 dje]$ lynx http://www.nocat.net >[dje@server1 dje]$ ls >NoCatAuth-nightly.tgz base/ bin/ dev/ musique/ subscriptions.opml

>tmp/ www@ >[dje@server1 dje]$ exit >logout > >Connection to decentric.com closed. >root@number-two:~# scp dje@decentric.com:NoCat* . >dje@decentric.com's password: >NoCatAuth-nightly.tgz 100%

> 89KB 41.3KB/s 00:02 >root@number-two:~# ls >NoCatAuth-nightly.tgz >root@number-two:~# tar xvfz NoCatAuth-nightly.tgz >NoCatAuth-nightly/ >NoCatAuth-nightly/bin/ >NoCatAuth-nightly/bin/detect-fw.sh >NoCatAuth-nightly/bin/admintool >NoCatAuth-nightly/bin/gateway >NoCatAuth-nightly/bin/vtun.sh >NoCatAuth-nightly/doc/ >NoCatAuth-nightly/doc/nocatrfc.txt >NoCatAuth-nightly/doc/working.iptables >NoCatAuth-nightly/doc/Introduction.txt >NoCatAuth-nightly/doc/nocat-conf.txt >NoCatAuth-nightly/doc/SameMachine.txt >NoCatAuth-nightly/doc/AuthService.txt >NoCatAuth-nightly/etc/ >NoCatAuth-nightly/etc/goodbye.html >NoCatAuth-nightly/etc/group >NoCatAuth-nightly/etc/README >NoCatAuth-nightly/etc/pam.conf >NoCatAuth-nightly/etc/exception >NoCatAuth-nightly/etc/nocat.schema >NoCatAuth-nightly/etc/groupadm >NoCatAuth-nightly/etc/vtund.conf >NoCatAuth-nightly/etc/logout.html >NoCatAuth-nightly/etc/fw-wrap.c >NoCatAuth-nightly/etc/httpd.conf >NoCatAuth-nightly/etc/passwd >NoCatAuth-nightly/etc/portforward.sample >NoCatAuth-nightly/etc/nocat.rc >NoCatAuth-nightly/etc/linux-2.4.config >NoCatAuth-nightly/lib/ >NoCatAuth-nightly/lib/NoCat/ >NoCatAuth-nightly/lib/NoCat/Group.pm >NoCatAuth-nightly/lib/NoCat/User.pm >NoCatAuth-nightly/lib/NoCat/Gateway.pm >NoCatAuth-nightly/lib/NoCat/Peer.pm >NoCatAuth-nightly/lib/NoCat/Source.pm >NoCatAuth-nightly/lib/NoCat/Source/ >NoCatAuth-nightly/lib/NoCat/Source/LDAP.pm >NoCatAuth-nightly/lib/NoCat/Source/NIS.pm >NoCatAuth-nightly/lib/NoCat/Source/PAM.pm >NoCatAuth-nightly/lib/NoCat/Source/RADIUS.pm >NoCatAuth-nightly/lib/NoCat/Source/IMAP.pm >NoCatAuth-nightly/lib/NoCat/Source/Samba.pm >NoCatAuth-nightly/lib/NoCat/Source/Passwd.pm >NoCatAuth-nightly/lib/NoCat/Source/DBI.pm >NoCatAuth-nightly/lib/NoCat/AuthService.pm >NoCatAuth-nightly/lib/NoCat/Gateway/ >NoCatAuth-nightly/lib/NoCat/Gateway/Open.pm >NoCatAuth-nightly/lib/NoCat/Gateway/Passive.pm >NoCatAuth-nightly/lib/NoCat/Gateway/Captive.pm >NoCatAuth-nightly/lib/NoCat/Firewall.pm >NoCatAuth-nightly/lib/NoCat/Message.pm >NoCatAuth-nightly/lib/NoCat.pm >NoCatAuth-nightly/pgp/ >NoCatAuth-nightly/pgp/trustedkeys.gpg >NoCatAuth-nightly/gateway.conf >NoCatAuth-nightly/BUGS >NoCatAuth-nightly/NEWS >NoCatAuth-nightly/TODO >NoCatAuth-nightly/authserv.conf >NoCatAuth-nightly/upgrade-0.80-db.pl >NoCatAuth-nightly/Makefile >NoCatAuth-nightly/LICENSE >NoCatAuth-nightly/README >NoCatAuth-nightly/libexec/ >NoCatAuth-nightly/libexec/pf/ >NoCatAuth-nightly/libexec/pf/reset.fw >NoCatAuth-nightly/libexec/pf/dump.fw >NoCatAuth-nightly/libexec/pf/access.fw >NoCatAuth-nightly/libexec/pf/initialize.fw >NoCatAuth-nightly/libexec/pf/clear.fw >NoCatAuth-nightly/libexec/ipchains/ >NoCatAuth-nightly/libexec/ipchains/reset.fw >NoCatAuth-nightly/libexec/ipchains/dump.fw >NoCatAuth-nightly/libexec/ipchains/access.fw >NoCatAuth-nightly/libexec/ipchains/initialize.fw >NoCatAuth-nightly/libexec/ipchains/clear.fw >NoCatAuth-nightly/libexec/ipfilter/ >NoCatAuth-nightly/libexec/ipfilter/initialize.fw >NoCatAuth-nightly/libexec/iptables/ >NoCatAuth-nightly/libexec/iptables/reset.fw >NoCatAuth-nightly/libexec/iptables/dump.fw >NoCatAuth-nightly/libexec/iptables/access.fw >NoCatAuth-nightly/libexec/iptables/initialize.fw >NoCatAuth-nightly/libexec/iptables/throttle.fw >NoCatAuth-nightly/libexec/iptables/clear.fw >NoCatAuth-nightly/libexec/loopback/ >NoCatAuth-nightly/libexec/loopback/dump.fw >NoCatAuth-nightly/libexec/loopback/initialize.fw >NoCatAuth-nightly/libexec/loopback/clear.fw >NoCatAuth-nightly/test.sh >NoCatAuth-nightly/htdocs/ >NoCatAuth-nightly/htdocs/fatal.html >NoCatAuth-nightly/htdocs/renew_pasv.html >NoCatAuth-nightly/htdocs/expired.html >NoCatAuth-nightly/htdocs/login_ok.html >NoCatAuth-nightly/htdocs/renew.html >NoCatAuth-nightly/htdocs/images/ >NoCatAuth-nightly/htdocs/images/auth_logo.gif >NoCatAuth-nightly/htdocs/images/update.gif >NoCatAuth-nightly/htdocs/images/login.gif >NoCatAuth-nightly/htdocs/images/continue.gif >NoCatAuth-nightly/htdocs/images/skip.gif >NoCatAuth-nightly/htdocs/images/reset.gif >NoCatAuth-nightly/htdocs/images/register.gif >NoCatAuth-nightly/htdocs/images/logout.gif >NoCatAuth-nightly/htdocs/logout.html >NoCatAuth-nightly/htdocs/status.html >NoCatAuth-nightly/htdocs/login-no-skip.html >NoCatAuth-nightly/htdocs/register_ok.html >NoCatAuth-nightly/htdocs/register.html >NoCatAuth-nightly/htdocs/login.html >NoCatAuth-nightly/htdocs/splash.html >NoCatAuth-nightly/htdocs/update.html >NoCatAuth-nightly/INSTALL >NoCatAuth-nightly/cgi-bin/ >NoCatAuth-nightly/cgi-bin/login >NoCatAuth-nightly/cgi-bin/admlogin >NoCatAuth-nightly/cgi-bin/update >NoCatAuth-nightly/cgi-bin/register >root@number-two:~# ls >NoCatAuth-nightly NoCatAuth-nightly.tgz >root@number-two:~# wget >bash: wget: command not found >root@number-two:~# rm NoCatAuth-nightly >rm: cannot remove `NoCatAuth-nightly': Is a directory >root@number-two:~# rm NoCatAuth-nightly.tgz >root@number-two:~# ls >NoCatAuth-nightly >root@number-two:~# apt-get install wget >Reading Package Lists... Done >Building Dependency Tree... Done >The following NEW packages will be installed: > wget >0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. >Need to get 416kB of archives. >After unpacking 1487kB of additional disk space will be used. >Get:1 http://rattler.thebasement.org unstable/main wget 1.9-1 [416kB] >Fetched 416kB in 1s (250kB/s) >Selecting previously deselected package wget. >(Reading database ... 7464 files and directories currently installed.) >Unpacking wget (from .../archives/wget_1.9-1_i386.deb) ... >Setting up wget (1.9-1) ... > >root@number-two:~# clear > >root@number-two:~# wget >http://rune.thebasement.org/~ice/tmp/stable-01.patch >--13:24:29-- http://rune.thebasement.org/%7Eice/tmp/stable-01.patch > => `stable-01.patch' >Resolving rune.thebasement.org... 209.162.205.200 >Connecting to rune.thebasement.org[209.162.205.200]:80... connected. >HTTP request sent, awaiting response... 200 OK >Length: 1,225 [text/plain] > >100%[========================================================>] 1,225

> --.--K/s > >root@number-two:~# ls >NoCatAuth-nightly stable-01.patch >root@number-two:~# cd NoCatAuth-nightly/ >root@number-two:~/NoCatAuth-nightly# ls >BUGS Makefile TODO cgi-bin gateway.conf libexec >upgrade-0.80-db.pl >INSTALL NEWS authserv.conf doc htdocs pgp >LICENSE README bin etc lib test.sh >root@number-two:~/NoCatAuth-nightly# patch -p1 < ../stable-01.patch >bash: patch: command not found >root@number-two:~/NoCatAuth-nightly# apt-get install patch >Reading Package Lists... Done >Building Dependency Tree... Done >The following NEW packages will be installed: > patch >0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. >Need to get 92.3kB of archives. >After unpacking 184kB of additional disk space will be used. >Get:1 http://rattler.thebasement.org unstable/main patch 2.5.9-1 >[92.3kB] >Fetched 92.3kB in 0s (111kB/s) >Selecting previously deselected package patch. >(Reading database ... 7509 files and directories currently installed.) >Unpacking patch (from .../patch_2.5.9-1_i386.deb) ... >Setting up patch (2.5.9-1) ... >root@number-two:~/NoCatAuth-nightly# patch -p1 < ../stable-01.patch >patching file bin/gateway >patching file lib/NoCat/Gateway.pm >root@number-two:~/NoCatAuth-nightly# ls >BUGS Makefile TODO cgi-bin gateway.conf libexec >upgrade-0.80-db.pl >INSTALL NEWS authserv.conf doc htdocs pgp >LICENSE README bin etc lib test.sh >root@number-two:~/NoCatAuth-nightly# vi /etc/kernel-img.conf >root@number-two:~/NoCatAuth-nightly# more /etc/kernel-img.conf >do_symlinks = No >do_initrd = Yes > >postinst_hook = /sbin/update-grub >postrm_hook = /sbin/update-grub >do_bootloader = No >root@number-two:~/NoCatAuth-nightly# apt-get install kernel-image-2.4-K6 >Reading Package Lists... Done >Building Dependency Tree... Done >The following extra packages will be installed: > cpio cramfsprogs dash initrd-tools kernel-image-2.4-k6 >kernel-image-2.4.22-1-k6 > module-init-tools >Suggested packages: > kernel-doc-2.4.22 pcmcia-modules-2.4.22-1-k6 >The following NEW packages will be installed: > cpio cramfsprogs dash initrd-tools kernel-image-2.4-k6 >kernel-image-2.4.22-1-k6 > module-init-tools >0 upgraded, 7 newly installed, 0 to remove and 0 not upgraded. >Need to get 11.4MB of archives. >After unpacking 30.5MB of additional disk space will be used. >Do you want to continue? [Y/n] >Get:1 http://rattler.thebasement.org unstable/main dash 0.4.18 [77.4kB] >Get:2 http://rattler.thebasement.org unstable/main cpio 2.5-1.1 [64.3kB] >Get:3 http://rattler.thebasement.org unstable/main cramfsprogs 1.1-4 >[19.6kB] >Get:4 http://rattler.thebasement.org unstable/main module-init-tools >0.9.15-pre2-2 [66.3kB] >Get:5 http://rattler.thebasement.org unstable/main initrd-tools 0.1.54

>[21.1kB] >Get:6 http://rattler.thebasement.org unstable/main >kernel-image-2.4.22-1-k6 2.4.22-3 [11.1MB] >Get:7 http://rattler.thebasement.org unstable/main kernel-image-2.4-k6

>2.4.22-3 [6198B] >Fetched 11.4MB in 29s (386kB/s) >Preconfiguring packages ... >Selecting previously deselected package dash. >(Reading database ... 7518 files and directories currently installed.) >Unpacking dash (from .../archives/dash_0.4.18_i386.deb) ... >Selecting previously deselected package cpio. >Unpacking cpio (from .../archives/cpio_2.5-1.1_i386.deb) ... >Selecting previously deselected package cramfsprogs. >Unpacking cramfsprogs (from .../cramfsprogs_1.1-4_i386.deb) ... >Selecting previously deselected package module-init-tools. >Unpacking module-init-tools (from >.../module-init-tools_0.9.15-pre2-2_i386.deb) ... >Selecting previously deselected package initrd-tools. >Unpacking initrd-tools (from .../initrd-tools_0.1.54_all.deb) ... >Selecting previously deselected package kernel-image-2.4.22-1-k6. >Unpacking kernel-image-2.4.22-1-k6 (from >.../kernel-image-2.4.22-1-k6_2.4.22-3_i386.deb) ... >Selecting previously deselected package kernel-image-2.4-k6. >Unpacking kernel-image-2.4-k6 (from >.../kernel-image-2.4-k6_2.4.22-3_i386.deb) ... >Setting up dash (0.4.18) ... > >Setting up cpio (2.5-1.1) ... > >Setting up cramfsprogs (1.1-4) ... > >Setting up module-init-tools (0.9.15-pre2-2) ... > >Setting up initrd-tools (0.1.54) ... > >Setting up kernel-image-2.4.22-1-k6 (2.4.22-3) ... >/initrd.img does not exist. Installing from scratch, eh? >Or maybe you don't want a symbolic link here. Hmm? Lets See. > >Setting up kernel-image-2.4-k6 (2.4.22-3) ... >root@number-two:~/NoCatAuth-nightly# dpkg -P lilo >(Reading database ... 8834 files and directories currently installed.) >Removing lilo ... >Purging configuration files for lilo ... >root@number-two:~/NoCatAuth-nightly# apt-get install grub >Reading Package Lists... Done >Building Dependency Tree... Done >Suggested packages: > grub-doc >The following NEW packages will be installed: > grub >0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. >Need to get 282kB of archives. >After unpacking 635kB of additional disk space will be used. >Get:1 http://rattler.thebasement.org unstable/main grub >0.93+cvs20031021-1 [282kB] >Fetched 282kB in 1s (281kB/s) >Selecting previously deselected package grub. >(Reading database ... 8795 files and directories currently installed.) >Unpacking grub (from .../grub_0.93+cvs20031021-1_i386.deb) ... >Setting up grub (0.93+cvs20031021-1) ... >root@number-two:~/NoCatAuth-nightly# grub-install /dev/hda >Probing devices to guess BIOS drives. This may take a long time. >Installation finished. No error reported. >This is the contents of the device map /boot/grub/device.map. >Check if this is correct or not. If any of the lines is incorrect, >fix it and re-run the script `grub-install'. > >(fd0) /dev/fd0 >(hd0) /dev/hda >root@number-two:~/NoCatAuth-nightly# update-grub >Searching for GRUB installation directory ... found: /boot/grub . >Testing for an existing GRUB menu.list file... > >Could not find /boot/grub/menu.lst file. Would you like >/boot/grub/menu.lst generated for you? (y/N) y >Found kernel: /boot/vmlinuz-2.4.22-1-k6 >Found kernel: /boot/vmlinuz-2.4.18-bf2.4 >Updating /boot/grub/menu.lst ... done > >root@number-two:~/NoCatAuth-nightly# update-grub >Searching for GRUB installation directory ... found: /boot/grub . >Testing for an existing GRUB menu.list file... found: >/boot/grub/menu.lst . >Found kernel: /boot/vmlinuz-2.4.22-1-k6 >Found kernel: /boot/vmlinuz-2.4.18-bf2.4 >Updating /boot/grub/menu.lst ... done > >root@number-two:~/NoCatAuth-nightly# reboot > >Broadcast message from root (pts/0) (Tue Oct 28 13:32:52 2003): > >The system is going down for reboot NOW! >root@number-two:~/NoCatAuth-nightly# Connection to 192.168.100.3 closed

>by remote host. >Connection to 192.168.100.3 closed. >Darrin-Edens-Computer:~ dje$ ssh dje@192.168.100.3 >^C >Darrin-Edens-Computer:~ dje$ ssh dje@192.168.100.3 >dje@192.168.100.3's password: >Linux number-two 2.4.22-1-k6 #5 Sat Oct 4 14:38:05 EST 2003 i586 >GNU/Linux > >The programs included with the Debian GNU/Linux system are free >software; >the exact distribution terms for each program are described in the >individual files in /usr/share/doc/*/copyright. > >Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent >permitted by applicable law. >Last login: Tue Oct 28 13:10:21 2003 from 192.168.100.4 >dje@number-two:~$ uname -a >Linux number-two 2.4.22-1-k6 #5 Sat Oct 4 14:38:05 EST 2003 i586 >GNU/Linux >dje@number-two:~$ sudo -s >Password: >root@number-two:~# apt-get install ssmtp >Reading Package Lists... Done >Building Dependency Tree... Done >The following packages will be REMOVED: > exim >The following NEW packages will be installed: > ssmtp >0 upgraded, 1 newly installed, 1 to remove and 0 not upgraded. >Need to get 26.4kB of archives. >After unpacking 1425kB disk space will be freed. >Do you want to continue? [Y/n] >Get:1 http://rattler.thebasement.org unstable/main ssmtp 2.60.4 [26.4kB] >Fetched 26.4kB in 0s (40.1kB/s) >Preconfiguring packages ... >Configuring Ssmtp >


> > The mail configuration file /etc/ssmtp/ssmtp.conf can be automatically > updated on each upgrade with the information supplied to the debconf > database. If you do not want this to happen (ie/ you want to maintain > control of this file yourself) then set this option to have the program > never touch this file. > >:-) Automatically overwrite config files? y > > > Mail sent to a local user whose UID is less than 1000 will instead be > sent here. This is useful for daemons which mail reports to root and > other system UIDs. > >:-) Who gets mail for userids < 1000? dje > > > This sets the host to which mail is delivered. The actual machine > name is required; no MX records are consulted. Commonly, mailhosts > are named "mail.domain.com". > >:-) Name of your mailhub? mail.personaltelco.net > > > ssmtp will use "username@REWRITEDOMAIN" as the default From: address > for outgoing mail which contains only a local username. > >:-) What domain to masquerade as? personaltelco.net > > > A "positive" response will permit local users to enter any From: line > in their messages without it being mangled, and cause ssmtp to rewrite > the envelope header with that address. A "negative" response will > disallow this, and use only the default address or addresses set in > /etc/ssmtp/revaliases. > >:-) Allow override of From: line in email header? y > > >dpkg: exim: dependency problems, but removing anyway as you request: > mailx depends on mail-transport-agent; however: > Package mail-transport-agent is not installed. > Package exim which provides mail-transport-agent is to be removed. >(Reading database ... 8836 files and directories currently installed.) >Removing exim ... >Selecting previously deselected package ssmtp. >(Reading database ... 8773 files and directories currently installed.) >Unpacking ssmtp (from .../archives/ssmtp_2.60.4_i386.deb) ... >Setting up ssmtp (2.60.4) ... > >root@number-two:~# deborphan >libident >libpcre3 >root@number-two:~# dpkg -P libident libpcre3 >(Reading database ... 8790 files and directories currently installed.) >Removing libident ... >Removing libpcre3 ... >Purging configuration files for libpcre3 ... >root@number-two:~# deborphan >root@number-two:~# pwd >/home/dje >root@number-two:~# ls >NoCatAuth-nightly stable-01.patch >root@number-two:~# cd NoCatAuth-nightly/ >root@number-two:~/NoCatAuth-nightly# ls >BUGS Makefile TODO cgi-bin gateway.conf libexec >upgrade-0.80-db.pl >INSTALL NEWS authserv.conf doc htdocs pgp >LICENSE README bin etc lib test.sh >root@number-two:~/NoCatAuth-nightly# make gateway >Looking for gpgv... >Checking for firewall compatibility: /sbin/iptables found. >libexec/iptables/access.fw -> bin/access.fw >libexec/iptables/clear.fw -> bin/clear.fw >libexec/iptables/clear.fw -> bin/clear.fw >libexec/iptables/dump.fw -> bin/dump.fw >libexec/iptables/initialize.fw -> bin/initialize.fw >libexec/iptables/reset.fw -> bin/reset.fw >libexec/iptables/throttle.fw -> bin/throttle.fw >/sbin/iptables -> bin/iptables >[ -d /usr/local/nocat ] || mkdir -p /usr/local/nocat >chmod 755 /usr/local/nocat >[ -d /usr/local/nocat/htdocs ] || cp -R htdocs /usr/local/nocat >cp -R bin /usr/local/nocat >Installing NoCat to /usr/local/nocat... >cp -R lib pgp /usr/local/nocat >[ -f /usr/local/nocat/nocat.conf ] || \ > perl -pe 's#/usr/local/nocat#/usr/local/nocat#g' gateway.conf \ > > /usr/local/nocat/nocat.conf > >-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- > Congratulations! > NoCat gateway is installed. To start it, check > /usr/local/nocat/nocat.conf, then run bin/gateway > as root. >-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- > >root@number-two:~/NoCatAuth-nightly# shutdown -h now > >Broadcast message from root (pts/0) (Tue Oct 28 13:39:32 2003): > >The system is going down for system halt NOW! >root@number-two:~/NoCatAuth-nightly# Connection to 192.168.100.3 closed

>by remote host. >Connection to 192.168.100.3 closed. >Darrin-Edens-Computer:~ dje$

NewCloneArmyInstallMethodology (last edited 2007-11-23 18:01:02 by localhost)