Differences between revisions 5 and 7 (spanning 2 versions)
Revision 5 as of 2006-06-03 14:32:16
Size: 1009
Comment: small changes, networking info added
Revision 7 as of 2006-06-03 23:48:39
Size: 1791
Comment: added a maintenance note.
Deletions are marked like this. Additions are marked like this.
Line 44: Line 44:
 *  * 2006-06-03: Installed today. Metrix is bridging to a nucab, ramona. DSL is provided by Stephouse via Covad. DSL modem is in PPPoE, a Broadxent Briteport DSL modem serves (what I assume is) relay'd DHCP. For some reason, the nucab is coming up without a default route (or it gets lost almost right away), which seems to confuse NoCatAuth. Adding the default route manually and restarting NoCat seems to fix it, but it isn't clear why it is failing to begin with. Also, upload speed (as reported by the DSL modem) is only 96 kbps. That kind of sucks. Also, we need to wire up and configure local access. And bill the node host for the remaining items on the parts list. --RussellSenior
Line 49: Line 49:
 * This node is [https://adhocracy.personaltelco.net/node/show/hollywood in Adhocracy]

Node name: Hollywood Library BR Live Date: June 3, 2006 BR Sponsor: Lisa Wylie BR Contact: Russell Senior <russell@personaltelco.net>

2134 NE 41st Avenue BR Portland, OR 97212 BR Map: NodeMap:NodeHollywood

Equipment

  • Metrix Mark I, 9 dBi omni w/ 7 degree downtilt
  • Nucab

Software Installed

  • Metrix Pyramid
  • Standard Builder install on nucab

Network Configuration

  • ESSID: www.personaltelco.net/hollywood
  • Channel: 11 (2.462 GHz)
  • BSSID: 00:0B:6B:4D:77:96
  • Nucab Hostname: ramona (10.11.62.1)
  • Metrix Hostname: henry (10.11.62.2)
  • Internet Network: 68.165.229.145/24
  • Gateway: 68.165.229.1/24
  • PTPnet Network: 10.11.62.0/25

Installers / Organizers

Maintenance and System Log

  • 2006-06-03: Installed today. Metrix is bridging to a nucab, ramona. DSL is provided by Stephouse via Covad. DSL modem is in PPPoE, a Broadxent Briteport DSL modem serves (what I assume is) relay'd DHCP. For some reason, the nucab is coming up without a default route (or it gets lost almost right away), which seems to confuse NoCatAuth. Adding the default route manually and restarting NoCat seems to fix it, but it isn't clear why it is failing to begin with. Also, upload speed (as reported by the DSL modem) is only 96 kbps. That kind of sucks. Also, we need to wire up and configure local access. And bill the node host for the remaining items on the parts list. --RussellSenior

Notes


[CategoryNode][CategoryPersonalTelco]

NodeHollywood (last edited 2008-04-18 20:38:57 by RussellSenior)