Differences between revisions 9 and 10
Revision 9 as of 2006-06-05 14:55:08
Size: 2194
Comment: noted outage
Revision 10 as of 2006-08-17 15:06:34
Size: 2504
Comment: added notes
Deletions are marked like this. Additions are marked like this.
Line 44: Line 44:
 * 2006-08-16: Reconnected Kate McPherron down the street whose WET11 had been out since the old node left. The WET11 needed repointing at the new SSID --RussellSenior
 * 2006-06-07: Ran new cat5 from the demarc to the DSL modem in the basement. Fixed up lan access with iptables hackery. --RussellSenior

Node name: Hollywood Library BR Live Date: June 3, 2006 BR Sponsor: Lisa Wylie BR Contact: Russell Senior <russell@personaltelco.net>

2134 NE 41st Avenue BR Portland, OR 97212 BR Map: NodeMap:NodeHollywood

Equipment

  • Metrix Mark I, 9 dBi omni w/ 7 degree downtilt
  • Nucab

Software Installed

  • Metrix Pyramid
  • Standard Builder install on nucab

Network Configuration

  • ESSID: www.personaltelco.net/hollywood
  • Channel: 11 (2.462 GHz)
  • BSSID: 00:0B:6B:4D:77:96
  • Nucab Hostname: ramona (10.11.62.1)
  • Metrix Hostname: henry (10.11.62.2)
  • Internet Network: 68.165.229.145/24
  • Gateway: 68.165.229.1/24
  • PTPnet Network: 10.11.62.0/25

Installers / Organizers

Maintenance and System Log

  • 2006-08-16: Reconnected Kate McPherron down the street whose WET11 had been out since the old node left. The WET11 needed repointing at the new SSID --RussellSenior

  • 2006-06-07: Ran new cat5 from the demarc to the DSL modem in the basement. Fixed up lan access with iptables hackery. --RussellSenior

  • 2006-06-05: Apparently flakey phone wire to the basement jack. Working on moving to better jack or rewiring basement run. Temporarily dysfunctional. --RussellSenior

  • 2006-06-03: Installed today. Metrix is bridging to a nucab, ramona. DSL is provided by Stephouse via Covad. DSL modem is in PPPoE, a Broadxent Briteport DSL modem serves (what I assume is) relay'd DHCP. For some reason, the nucab is coming up without a default route (or it gets lost almost right away), which seems to confuse NoCatAuth. Adding the default route manually and restarting NoCat seems to fix it, but it isn't clear why it is failing to begin with. Also, upload speed (as reported by the DSL modem) is only 96 kbps. That kind of sucks. Also, we need to wire up and configure local access. And bill the node host for the remaining items on the parts list. --RussellSenior

ToDo

In approximate order of priority

Notes


[CategoryNode][CategoryPersonalTelco]

NodeHollywood (last edited 2008-04-18 20:38:57 by RussellSenior)