This document goes hand in hand with the DebianLinuxAccessPoint page. Once your image is created this shows you how to load the image onto a FujitsuStylistic1000. You can download it in two formats:

If you think that you've found a bug in the image please report it on the DebianApImageBugs page, make sure you include enough information for me to duplicate it. -- AdamShand

See also: HostApMode

Using the dd image

  1. Put drive in laptop, it should show up as /dev/hde (if it doesn't you'll need to adjust the rest of the document accordingly).
  2. This took up about 15 miuntes on a 166 MHz Toshiba Notebook

    # bunzip2 -dc ImageFileName.bz2 | dd of=/dev/hde
    666144+0 records in
    666144+0 records out
    # 
  3. Put drive in Fujitsu, and boot it.
    • Wow it even does IPv6! Oops, it didn't recognize the DLink DWL-650 cause

      prism2: GetNextTuple: No more items
    • Login as root, no password.
    • Oh yeah, its a CardBus card, and the Fujitsu doesn't do CardBus.

--JayPrimePositve

Using the tar ball

  1. Put drive in laptop, it should show up as /dev/hde (if it doesn't you'll need to adjust the rest of the document accordingly).
  2. Format the disk (if you don't have cfdisk, normal fdisk will do just fine):

    # cfdisk /dev/hde I set my partition table up like this and it seems to work fairly well. {{{hde1 Boot Primary Linux 299.93

hde2 Primary Linux swap 41.15}}}


[CategoryHowto]