← Revision 22 as of 2007-11-23 18:01:26
converted to 1.6 markup
Revision 23 as of 2012-03-10 22:29:10
|Deletions are marked like this.||Additions are marked like this.|
|Line 35:||Line 35:|
|[CategoryBeWitched] [CategoryDocumentation]||[CategoryBeWitched] [CategoryDocumentation][CategoryHistorical]|
BeWitched is a LinuxAccessPoint based on Debian designed to run on the CloneArmy Box and the Soekris 4521 (should also run on 4501 and maybe the 4511). The root filesystem is readonly and the /var filesystem is recreated at boot, this means that unless there is a hardware failure the system will always boot on power-up. There is also a read/write file system that is not mounted by default that can be used for persistent data, but it is not yet used and the procedure to mount and recover from filesystem errors is not yet in place.
With this release the console will run at 19200 as oposed to 9600 as before, 19200 is the speed that the soekris is configured for ath the factory.
In the case of the SoekrisBox the system resides on a CompactFlash currently 128MB. Currently the CF filsystem is not compressed and contains much data not needed at run-time, it is planned to change this to reduce the size of the system image.
at this point the system can be configured if this is the intended hardware, or a tar file of the system can be produced
"tar czf /u/linuxap.tgz bin home lib mnt sbin boot etc initrd opt root usr"
for the next step.
finally the system is configured for the specific node.
a list of information needed to ConfigureBeWitched
To verify the contents of the system the following commands help:
"find bin boot initrd lib opt root sbin usr -not -name nocat.conf -not -name splash.html -not -name status.html -type f |xargs md5sum" "(find etc -type f ;echo usr/nocat/nocat.conf\nusr/nocat/htdocs/splash.html\nusr/nocat/htdocs/status.html ) |xargs md5sum"