Diff for "NewNodeChecklist" - Personal Telco Project

Differences between revisions 1 and 7 (spanning 6 versions)

Checklist

Tools and services to update as new NOT nodes come online.

NetworkAddressAllocations
1. Allocate range.
OpenVPN
1. Add proper network script in openvpn/ccd and it MUST match the host's CN.
2. New nodes don't need this, are getting allocated an address automatically on an iris vpn via a client.sh or something
DNS
1. Add public AAAA record to donk:/etc/bind/master/personaltelco.net
2. Add .ptp A records to donk:/etc/bind/master/ptp
3. Add .ptp PTR records to donk:/etc/bind/master/ip4-ptp
4. Update serial in donk:/etc/bind/include/header
5. Reload bind, # rndc reload
6. public IPv4 addresses will dynamically get created in the $hostname.dyn.personaltelco.net domain, using remote syslogging and syslog-ng magic
Nagios
1. Add host to donk:/etc/nagios3/hosts.cfg
2. Add host in appropriate hostgroups in donk:/etc/nagios3/conf.d/hostgroups
Munin
1. Add host to /etc/munin/munin.conf (on iris)
2. Run munin-node-configure --snmp <host> -shell | sh or /etc/munin/snmp.sh <host> for standard wgt634u nodes. Finally, /etc/init.d/munin-node restart
SmokePing
1. Add host to smokeping/config
NodeMap
1. Add location and make sure to login via admin interface and add the hostname so graphs, usercount show up.

Extra

CurrentUsers
1. Add host -> NodeName in <webroot>/users/host_map which will populate the CurrentUsers page

[CategoryPersonalTelcoAdmin]

-  ← Revision 1 as of 2009-12-28 17:45:13 →
  Size: 192
  Editor: JasonMcArthur
  Comment: idea
+  ← Revision 7 as of 2012-02-16 00:13:27 →
  Size: 1507
  Editor: RussellSenior
  Comment: make more explicit directions
-Deletions are marked like this.
+Additions are marked like this.
 Line 5:
-. This

 1. That

  1. Also This with That

  1. Repeat

 1. Honk
+. NetworkAddressAllocations

  1. Allocate range.

 1. OpenVPN

  1. Add proper network script in openvpn/ccd and it MUST match the host's CN.

  2. New nodes don't need this, are getting allocated an address automatically on an iris vpn via a client.sh or something

 1. DNS

  1. Add public AAAA record to donk:/etc/bind/master/personaltelco.net

  2. Add .ptp A records to donk:/etc/bind/master/ptp

  3. Add .ptp PTR records to donk:/etc/bind/master/ip4-ptp

  4. Update serial in donk:/etc/bind/include/header

  5. Reload bind, # rndc reload

  6. public IPv4 addresses will dynamically get created in the $hostname.dyn.personaltelco.net domain, using remote syslogging and syslog-ng magic

 1. Nagios

  1. Add host to donk:/etc/nagios3/hosts.cfg

  1. Add host in appropriate hostgroups in donk:/etc/nagios3/conf.d/hostgroups

 1. Munin

  1. Add host to /etc/munin/munin.conf (on iris)

  1. Run {{{munin-node-configure --snmp <host> -shell | sh}}} or {{{/etc/munin/snmp.sh <host>}}} for standard wgt634u nodes.  Finally, {{{/etc/init.d/munin-node restart}}}

 1. SmokePing

  1. Add host to smokeping/config

 1. NodeMap

  1. Add location and make sure to login via admin interface and add the hostname so graphs, usercount show up.



=== Extra ===

 1. CurrentUsers

  1. Add host -> !NodeName in <webroot>/users/host_map which will populate the CurrentUsers page