Version 0.2

This procedure must be done as root on a machine that can mount a Compact Flash device as a disk drive.  You will also need grub installed.  If starting from a stage2 tarfile skip the first part of this.

wget http://www.personaltelco.net/download/bewitched/stage1-0.2.tgz
mkdir readonly
cd readonly
tar xzf ../stage1-0.2.tgz

edit etc/resolv.conf.default
        set up as appropriate for network config
                suggestion use maus as a nameserve
                    untill final configuration:
                "search personaltelco.net"
                "nameserver 204.245.198.90"

edit root/bin/mountu
        change /dev/hda4 to /dev/hda2

edit boot/grub/menu.lst
        change line: "terminal --timeout=10 serial console"
        to: "terminal --timeout=0 serial"
        change all instances(3) of: "console=tty0"
        to: "ramdisk_size=16384"
        delete lines "savedefault"

edit etc/init.d/mountall.sh
        before the line "mount -avt nonfs,nosmbfs,noncpfs,noproc"
        change "mkfs.ext2 /dev/hda3" to "mkfs.ext2 /dev/ram0"

edit etc/fstab
        change "/dev/hda3" to "/dev/ram0"
        delete lines for floppy, cdrom and swap (/dev/hda4)
        change "/dev/hda4" to "/dev/hda2"

edit etc/modules
        change "ne" to "natsemi"
        delete line "hostap_plx"

edit etc/default/pcmcia
        change "PCIC=i82365"" to "PCIC=yenta_socket"

edit etc/network/interfaces
        configure network as appropriate
                iface wlan0 inet static
                        address 10.11.0.1
                        netmask 255.255.255.0
                        network 10.11.0.0
                        broadcast 10.11.0.255
                        pre-up iwconfig wlan0 mode master
                        pre-up iwconfig wlan0 channel 1
                        pre-up iwconfig wlan0 essid www.personaltelco.net


# remove ssh keys
rm etc/ssh/*key*

edit etc/shadow
        change root to no password
                second field empty

mkdir dev proc var
ln -s /var/tmp tmp

at this point you can run "tar czf ../stage2-0.2.tgz *"

Start here if you already have a stage2 tarfile 

dd if=/dev/zero of=/dev/hdc count=100
cfdisk /dev/hdc
        hdc1 125m       bootable
        hdc2 (the rest of the device)

mkfs.ext2 /dev/hdc1
mount /dev/hdc1 /mnt/tmp

tar -C /mnt/tmp -xf ../stage2-0.2.tgz
umount /mnt/tmp

mkfs.ext3 /dev/hdc2

run grub and enter the following commands
        device (hd0) /dev/hdc
        root (hd0,0)
        setup (hd0)
        quit

At this point the CF is ready for first boot in the soecris box. 

on first boot

remountrw
set password for root and ptp
dpkg-reconfigure ssh
        use all defaults

reconfigure network

remountro

--- BrianBeattie

[CategoryBeWitched]