Comments on Orinoco's RG-1000 from the AccessPointReviews page.

From a post to the MailingList by ["RichardLangis"]Jr:

From a post my KenCaruso:

* 01-2002: For those with a brand spankin'-new RG-1000: Download and use the AP-1000 package from, as mentioned above, to upgrade the firmware. Do this FIRST THING. If you decide to use the bundled RG-1000 utility to do the firmware upgrade, be sure not to change the default identifier in the RG-1000 (6 hex digits). If you change this identifier, the bundled RG-1000 utility will not be able to talk with the RG in order to upgrade the firmware. Once the firmware is upgraded, you will still want to use the AP-1000 configuration utility and toss the RG utility. -- AlHooton

Restore Firmware Configuration. The RG-1000 can be restored to the original factory firmware by unplugging power, push & hold Forced Reload button, then turn on power. Hold the button for about 5 seconds and then the RG-1000 will be restored to same condition as when you first received it. -- BrianBarrera

* 06-15-2002 Just ebayed a RG1000, flashing with the AP-500 firmware could not have been easier. I am now running safe and secure 802.1x via Win2kserver ans IAS. The full Microsoft paper can be read here, --Michael Burns