Comments on the Linksys WAP11 AccessPoint from the AccessPointReviews page.


Please note that the 100mW hack for the LinksysWap11 is bad bad bad. CaseyHalverson has posted some notes on why [http://www.maokhian.com/wireless/wap11.html it's bad]. -- AdamShand

Also Ivan Korshun reports that it is possible to get signal strength from the Wap11's via SNMP if you are running firmware 1.4h3 (or later i presume). Details below ... -- AdamShand

If firmware 1.4h3 you can use OID: 1.3.6.1.4.1.410.1.2.7.1.0

wirelessKnownAPsNum OBJECT-TYPE

}}}

For measure signal strength on a WAP11 in mode AP_client, using SNMPInquisitor.jar. In firmware 1.4h3 I have detected the following OIDs:

1.1.1.1.0 1.1.1.2.0 1.1.1.3.0 1.1.1.4.0 1.1.1.5.0 1.1.1.6.0 1.1.2.1.0 1.1.2.2.0 1.1.2.3.0 1.1.2.4.0 1.1.2.5.0 1.1.2.6.0 1.1.3.1.0 1.1.4.1.0 1.1.4.2.0 1.1.7.1.0 1.1.7.2.0 1.1.8.1.0 1.1.8.2.0 1.1.8.8.0 1.1.8.9.0 1.1.9.1.0 1.1.9.2.0 1.1.9.3.0 1.2.1.1.0 1.2.1.2.0 1.2.1.3.0 1.2.1.4.0 1.2.1.5.0 1.2.1.6.0 1.2.1.7.0 1.2.1.8.0 1.2.1.9.0 1.2.1.10.0 1.2.1.11.0 !!! (SSID ENABLE_1 \ DISABLE_2 ) 1.2.1.12.0 !!! New, unknow 1.2.2.1.0 1.2.2.2.0 1.2.2.3.0 1.2.2.4.0 1.2.2.5.0 1.2.2.6.0 1.2.3.1.0 1.2.5.1.0 1.2.5.2.0 1.2.6.1.0 1.2.6.2.0 1.2.7.1.0 1.3.1.0.0 !!! unknow 1.2.2.2.2 !!! unknow 1.1.3.6.1 !!! unknow 1.1.0.9.0 !!! unknow}}}

Details OIDs the description in the file AT76C510.mib 30348 02.08.01 15:57 from new utilities WAP11.


[CategoryDocumentation][CategoryHardware]